1. The instrument should be placed in a clean and dry room (room temperature 20 °C ± 5 °C, humidity below 60%) to avoid surface contamination of optical parts, rust of metal parts, dust and debris falling into the moving rail, affecting instrument performance
2. After the instrument is used, the working surface should be wiped clean at any time. It is best to cover the dust jacket.
3. The transmission mechanism and moving guide of the instrument should be regularly lubricated to make the movement of the mechanism smooth and maintain a good use state.
4. The surface of the workbench glass and paint is dirty. It can be wiped clean with a neutral detergent and water. Never use organic solvents to wipe the surface of the paint. Otherwise, the surface of the paint will be tarnished.
5, instrument LED light source has a long service life, but when there is a bulb burnout, please inform the manufacturer, and replace it with a professional.
6. Precision parts of the instrument, such as image system, work table, optical ruler and Z-axis transmission mechanism, need to be precisely adjusted. All adjustment screws and fastening screws are fixed. Customers should not disassemble them themselves. If there is any problem, please inform the manufacturer. solve.
7. The software has accurately compensated the error between the workbench and the optical scale. Do not change it yourself. Otherwise, an erroneous measurement result will be produced.
8. All electrical connectors of the instrument should not be unplugged. If it has been unplugged, it must be correctly inserted and tightened according to the mark. Improper plugging and lightness can affect the function of the instrument, and damage can damage the system.
