The operation of the automatic image measuring instrument is as follows:

I. Equipment preparation and start-up:

1. Ensure that the power plug is firmly inserted into the power socket, and check whether the power cable and data cable are intact.

2. Place the measuring instrument in a stable, dust-free, vibration-free and well-ventilated working environment.

3. Turn on the power switch, wait for the self-test of the measuring instrument to complete, start the computer software matching with the measuring instrument.

Ii. System calibration and debugging:

1. According to the software prompts, use standard parts to calibrate the measuring instrument to ensure measurement accuracy.

2. Select the right lens according to the measurement requirements, and adjust the lens height and focal length to ensure that the measured object is clearly visible in the lens field of view.

3. Adjust the brightness and Angle of the light source of the measuring instrument to obtain the best measurement effect.

Iii. Preparation of the tested object and software setup:

1. Place the measured object on the measuring table to ensure that the object is stable and does not tilt, and remove oil, burrs and other impurities on the surface.

2. Set measurement parameters in the software, such as measurement unit, accuracy, etc.

Iv. Perform measurements:

1. Use the positioning function in the software to accurately position the measured object on the measuring platform.

2. Select the point, line, circle and other geometric elements to be measured in the software, or select the basic measurement mode or advanced measurement mode (such as contour scanning, 3D measurement) for measurement.

3. Click the measurement button, and the measuring instrument will automatically collect and process data.

V. Data viewing, export and analysis:

1. View the measurement results in the software, including the measured value, error range, etc.

2. Export the measurement results in Excel, PDF, and other formats as required.

3. Statistical analysis of measurement data to generate reports or charts.

Vi. Maintenance and maintenance:

1. Regularly clean the measuring instrument surface and lens, avoid the use of chemical cleaners.

2. Lubricate and maintain the parts that need to be lubricated to ensure the smooth operation of the measuring instrument.

3. Avoid collision and dropping the measuring instrument to avoid damage.

In addition, when operating the automatic image measuring instrument, it is necessary to strictly comply with the operating specifications and safety measures in the instruction manual, such as wearing gloves, glasses, etc., to ensure equipment safety and personal safety.

The above steps and precautions help users better grasp the use of automatic image measuring instrument, improve work efficiency and measurement accuracy. For detailed or specific operations, refer to the official user manual of the measuring instrument or contact the device supplier for technical support.